2 devices, ttyUSB1 and ttyUSB2 should show up. If the numbers are different, something like ttyUSB0 and ttyUSB1, edit /etc/asterisk/dongle.conf and change the values below [dongle0] accordingly.Many modems require the usb_modeswitch program to switch over from CD-drive mode (for installing Windows drivers) to modem mode. The /dev/ttyUSB devices will not appear before the switch-over was done. Make sure to have all the latest upgrades on recent Debian Jessie based images to fix some initial bugs with usb_modeswitch. If your modem is still not switching it might be necessary to add a custom rule for usb_modeswitch.
This post is about another crack/Hack . Today im going to write about simple,100% free , and fast method to unlock huawei HSDPA (3G,3.5G) dongles/Modems. You can use this feature for unlock these huawei modems-
I have istalled the drivers including the user interface for the default modem network(its plug and play) and its being detected,problem arises when i try unlocking the modem..i get the same code from different unlockers but going past that is the iisue,even when i insert a simcard from a different network provider i dont get the insert unlock code option..pliz help
Hi Ruchira, Hope you good. I am in need of your help. I have a huawei E1750 modem with IMEI:353558042239863. But if i put another sim card in it doesnt ask for unlock code. How can i unlock this modem without an unlock code option?
I download Huawei modem plus software. and my device unlock within few minuites. I already unlock huawei e1550, when i unlock the speed of surfing was 1-2mbps. but after disconnect next time I got poor speed, Is there any thing like service provider controlling our speed? ans. please.
Hello Kelvin, I downloaded both unlocking software from the MEGA link, both are not working on my computer which runs the latest windows 10. If I ignore the windows error messages the software starts but not detects the modem (HUAWEI E1762), even not if the COM port is manually entered. Actually this modem is already unlocked and I have a mobile partner version running which supports calls. But when making calls it say immediately call failed. Can anybody here confirm that the E1762 is actually able to make calls? 2b1af7f3a8